O2 Sensor Circuit Malfunction (Bank 1, Sensor 1)

What it means

The upstream oxygen sensor measures oxygen in the exhaust before the catalytic converter, and the computer relies on it to adjust fuel delivery. This code means its signal is not behaving properly, either not switching or stuck at an implausible value.

Symptoms4

• Higher fuel consumption.
• Occasionally unstable idle.
• Strong exhaust smell.
• Check engine light on.

Possible causes5

• Aged or contaminated oxygen sensor.
• Sensor connector or wiring damaged or melted by exhaust heat.
• Exhaust leak near the sensor.
• Very rich or lean mixture confusing the sensor.
• Engine computer fault (rare).

How to diagnose and fix5

1. Inspect sensor wiring and make sure it is clear of the exhaust.
2. Check for exhaust leaks ahead of the sensor.
3. Watch the sensor signal with a scan tool; with a warm engine it should switch quickly.
4. Fix any other fuel mixture codes first.
5. Replace the sensor if its signal is flat or slow and the wiring is good.

Repair cost

In Saudi riyals; the highlighted part is the expected range for this fault.

An upstream sensor is moderately priced, and cost can reach the second tier where access is difficult or genuine parts are expensive.

Prices are rough estimates for common cars at independent workshops and vary with the car and the source of the part.

Frequently asked questions