Seat Belt Reminder Light
What it means
A reminder that the driver or a passenger has not fastened their seat belt. The fix is usually simple, but if the light stays on with all belts fastened there may be a sensor or buckle fault.
Symptoms3
- The light is on with a repeating chime.
- The light stays on even with all belts fastened.
- A warning when a heavy bag sits on the front seat.
Possible causes4
- The driver or passenger belt is not fastened.
- A heavy item on the seat fools the occupancy sensor.
- A dirty or faulty belt buckle.
- A faulty occupancy sensor or its wiring under the seat.
How to diagnose and fix4
- Fasten the seat belt for every occupant before moving off.
- Remove heavy items from the front seat or buckle the belt around them.
- Clean the buckle and make sure the tongue clicks fully into place.
- If the problem continues, have the sensor and wiring checked at a workshop.
Repair cost
In Saudi riyals; the highlighted part is the expected range for this fault.
Usually free, with a small cost if a buckle or sensor wiring needs replacing.
Prices are rough estimates for common cars at independent workshops and vary with the car and the source of the part.
Frequently asked questions
Should I use a dummy clip to silence the chime?
No. It disables an important safety function and can affect airbag and pretensioner behaviour in a crash.
Do rear passengers need to wear seat belts?
Yes, traffic rules in Saudi Arabia require it, and it lowers the risk of injury for everyone in the car.
This guide is for information only and does not replace an inspection by a qualified technician. If the fault involves brakes, steering, engine temperature, electrics or refrigerant, do not attempt the repair yourself.
Report a mistake
Spotted something inaccurate? Tell us and we will review and correct it.
Report received — thank you
This is your private tracking link. It shows the status and our reply as soon as it is posted.
The link is saved in this browser only.