High Beam Indicator
What it means
A blue light showing that the high beams are on. They help on dark empty roads but dazzle oncoming drivers, so dip them when there are vehicles ahead or approaching.
Symptoms3
- The blue indicator is lit on the cluster.
- Oncoming drivers flash their lights at you.
- The beam reaches farther and higher down the road.
Possible causes3
- The light stalk has been pushed forward to switch on high beams.
- Automatic high beam is active.
- The stalk was pulled back for a brief flash.
How to diagnose and fix3
- Pull the stalk back to the normal position to switch off high beams.
- Dip the lights when a car approaches or when following another vehicle.
- If the light stays on with the stalk in the normal position, have the light switch checked.
Repair cost
In Saudi riyals; the highlighted part is the expected range for this fault.
Usually no cost, and in rare cases a light switch needs a low cost replacement.
Prices are rough estimates for common cars at independent workshops and vary with the car and the source of the part.
Frequently asked questions
When should I use high beams?
On dark roads with no other traffic, dipping them immediately when another vehicle appears.
Do high beams help in fog or dust?
No. They reflect off fog and dust and reduce visibility. Use low beams and fog lights instead.
This guide is for information only and does not replace an inspection by a qualified technician. If the fault involves brakes, steering, engine temperature, electrics or refrigerant, do not attempt the repair yourself.
Report a mistake
Spotted something inaccurate? Tell us and we will review and correct it.
Report received — thank you
This is your private tracking link. It shows the status and our reply as soon as it is posted.
The link is saved in this browser only.