Motor locked or overloaded

Home Appliance Error Codes LG Washing machines Short guide

Can you still use it? With care until repaired

Typical cost Under SAR 1,500

What it means

On LG washers, LE usually indicates the motor is not turning normally, due to overloading, an obstruction, or a fault in the motor or its circuit. The meaning can vary by model, so check the manual for your machine.

Symptoms3

The drum does not turn or turns with difficulty.
The machine stops suddenly mid-cycle.
Clicking or grinding noise.

Possible causes5

Laundry load far too heavy.
Small item jammed between the inner and outer tub.
Faulty motor position sensor or connector.
Damaged motor windings.
Main control board fault.

How to diagnose and fix4

Unplug the machine for ten minutes, then restart.
Reduce the load and try a short cycle.
With power off, turn the drum by hand to check it moves freely.
If the code persists, have a technician test the motor and sensor; do not open the machine yourself.

Repair cost

0–200

200–600

600–1,500

1,500+

In Saudi riyals; the highlighted part is the expected range for this fault.

No cost if overload was the cause; motor or board faults cost more.

Prices are rough estimates including the part and the technician’s fee, and vary with brand, model and part source.

Frequently asked questions

Can it appear after moving the washer?

It can if the motor connector loosened in transit.

Can I keep using it?

If the code clears with a smaller load, yes; if it keeps returning, stop until it is checked.

This guide is for information only and does not replace an inspection by a qualified technician. If the fault involves brakes, steering, engine temperature, electrics or refrigerant, do not attempt the repair yourself.

Report a mistake

Spotted something inaccurate? Tell us and we will review and correct it.