Water not filling properly

Home Appliance Error Codes LG Washing machines Short guide

Can you still use it? With care until repaired

Typical cost Under SAR 600

What it means

On LG washers, IE commonly means water did not reach the required level in time. In homes supplied from a roof tank, low water pressure is a frequent cause. The meaning can vary by model, so check the manual for your machine.

Symptoms3

The machine stops at the start of a cycle.
Water enters slowly or not at all.
A faint hum from the inlet valve with no flow.

Possible causes5

Supply tap closed or only partly open.
Low water pressure or an empty tank.
Inlet filter screen clogged with scale.
Kinked inlet hose.
Failed water inlet valve.

How to diagnose and fix4

Check the tap is open and water flows strongly.
Unplug the machine, close the tap, remove the hose and clean the filter screen.
Straighten any kinks in the hose.
If the code persists with good pressure, have a technician check the inlet valve.

Repair cost

0–200

200–600

600–1,500

1,500+

In Saudi riyals; the highlighted part is the expected range for this fault.

Cleaning the screen is free; an inlet valve is a low to moderate cost.

Prices are rough estimates including the part and the technician’s fee, and vary with brand, model and part source.

Frequently asked questions

Can hard water cause this code?

Yes, scale gradually clogs the filter screen and reduces flow.

Can a weak house pump cause it?

Yes, low household pressure can trigger it even when the washer is fine.

This guide is for information only and does not replace an inspection by a qualified technician. If the fault involves brakes, steering, engine temperature, electrics or refrigerant, do not attempt the repair yourself.

Report a mistake

Spotted something inaccurate? Tell us and we will review and correct it.